ips series industrial pressure transducer - ceramic the ips series is the probe uses a piezo- suitable for use in a wide range of industrial applications. resistive sens , within a stainless steel housing ceramic or giving excellent media compatibility the electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics . , especially industrial applications. each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. accuracy < 0. % fs bfsl 25 pressure ranges from -1 to 400 bar piezo-resistive thick film ceramic sensor stainless steel body various outputs including mv, volts and ma. performance accuracy (non-linearity <0. % / fs (bfsl) & hysteresis) 25 setting errors (offsets) 2-wire zero & full scale, <0.5% / fs 3-wire zero & full scale, <0.5% / fs 4-wire zero & full scale, <0.5% / fs @ 10 volts electrical protection supply reverse polarity no damage/no function electromagnetic compatibility ce compliant mechanical stability shock 100g / 11s vibration 10g rms (20 - 2000hz) temperatures & thermal effects operating temperature -20oc to +135oc ambient temperature -20oc to +80oc storage temperature -20oc to +125oc compensated temperature range +20oc to +80oc thermal zero shift (tzs) <0.04% /fs/oc thermal span shift <0.015% /oc material specifications housing stainless steel ?o? ring seals viton diaphragm ceramic al o 96% 23 media wetted parts housing & connection, ?o? ring seal, diaphragm weight approx 100g installation position any operational life > 100x 10 cycles 6 insulation resistance > 50mohms at 50vdc pressure ranges and passive mv/v outputs nominal pressure, gauge, bar 1 2 5 10 20 50 100 250 400 compound range bar -1 to 0 -1 to 2 -1 to 5 -1 to 9 -1 to 19 -1 to 24 permissible overpressure bar 2 4 10 20 40 100 200 400 650 burst pressure bar 4 5 12 25 50 120 250 500 650 www.cynergy3.com ? 2014 cynergy3 components, all rights reserved. specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cynergy3 components limited. iso 9001 certified cynergy3 components ltd. 7 cobham road ferndown industrial estate wimborne, dorset bh21 7pe t elephone +44 (0) 1202 897969 email:sales@cynergy3.com output signals and supply voltages wire system output supply voltage connection s pin no 2-wire 4-20ma 9-32vdc +ve supply -ve supply ground pin 1 pin 2 earth pin 3-wire 0-5vdc -32vdc +ve supply -ve supply 9 pin 1 pin 2 +ve output ground pin 3 earth pin 4-wire (amplified) +ve supply -ve supply 10mv/v (ratiometric) 3-12vdc pin 1 pin 2 +ve output -ve output pin 3 earth pin
ips series industrial pressure sensor - ceramic www.cynergy3.com ? 2014 cynergy3 components, all rights reserved. specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cynergy3 components limited. cynergy3 components ltd. 7 cobham road ferndown industrial estate wimborne, dorset bh21 7pe telephone +44 (0) 1202 897969 email:sales@cynergy3.com iso 9001 certified mechanical dimensions p 7 cable entry gland g ? 24mm 11.8mm 81mm nominal 50mm nominal 18mm af hex 1/4? bsp male thread 4 pin din 43650 connector part number pressure rating output ips-g1000-3 0 - 1 bar g 0 - 100mv ips-g1000-5 0 - 1 bar g 4 - 20ma ips-g1000-6 0 - 1 bar g 0 - 5v ips-g6000-3 0 - 6 bar g 0 - 100mv ips-g6000-5 0 - 6 bar g 4 - 20ma ips-g6000-6 0 - 6 bar g 0 - 5v ips-gm1p9-5 -1 to +9 bar g 4 - 20ma IPS-GM1P9-6 -1 to +9 bar g 0 - 5v ips-g1002-3 0 - 10 bar g 0 - 100mv ips-g1002-5 0 - 10 bar g 4 - 20ma ips-g1002-6 0 - 10 bar g 0 - 5v ips-g1602-3 0 - 16 bar g 0 - 100mv ips-g1602-5 0 - 16 bar g 4-20ma ips-g1602-6 0 - 16 bar g 0-5v ips-c0184-5 -1 to +24 bar g 4 - 20ma ips-c0184-6 -1 to +24 bar g 0 - 5v ips-g2502-3 0 - 25 bar g 0 - 100mv ips-g2502-5 0 - 25 bar g 4 - 20ma ips-g2502-6 0 - 25 bar g 0 - 5v ips-g4002-3 0 - 40 bar g 0 - 100mv ips-g4002-5 0 - 40 bar g 4 - 20ma ips-g4002-6 0 - 40 bar g 0 - 5v ips-g1003-3 0 - 100 bar g 0 - 100mv ips-g1003-5 0 - 100 bar g 4 - 20ma ips-g1003-6 0 - 100 bar g 0 - 5v ips-g2503-3 0 - 250 bar g 0 - 100mv ips-g2503-5 0 - 250 bar g 4 - 20ma ips-g2503-6 0 - 250 bar g 0 - 5v ips-g4003-3 0 - 400 bar g 0 - 100mv ips-g4003-5 0 - 400 bar g 4 - 20ma ips-g4003-6 0 - 400 bar g 0 - 5v
|
